Commissioning Engineer (Cathodic Protection)
Abu Dhabi, United Arab Emirates
Full-time
Advertisement
Job Description
Key Responsibilities
- Prepare and review commissioning procedures, test plans, checklists, and inspection and test records for impressed current and galvanic anode CP systems.
- Verify installation and readiness of transformer rectifiers, anode beds, junction boxes, test stations, reference electrodes, and associated cables against approved drawings.
- Perform and witness pre-commissioning checks, including cable continuity and insulation resistance, polarity verification, anode bed resistance, and baseline structure-to-electrolyte potential measurements.
- Energize and adjust transformer rectifiers, measure current output and protection potentials, and verify performance against project acceptance criteria.
- Carry out ON and instant-OFF potential measurements, close-interval potential surveys (CIPS), and interference testing where required by the project.
- Troubleshoot issues such as low protection levels, stray current interference, cable faults, and rectifier failures. Coordinate corrective work and retesting.
- Coordinate commissioning activities and client witness inspections with construction, QA/QC, HSE, vendors, and operations teams.
- Close commissioning punch items and prepare test reports, baseline readings, and handover dossiers.
- Ensure all field activities comply with site HSE requirements, permit-to-work procedures, and electrical isolation requirements.
Knowledge & Skills:
- Bachelor’s degree in Electrical, Materials, Corrosion, or a related engineering discipline.
- Minimum 5 years of relevant experience in cathodic protection, including hands-on commissioning of CP systems on oil and gas projects.
- Practical experience with both impressed current and galvanic anode systems, including field measurements, troubleshooting, and client handover.
- Ability to interpret CP layouts, wiring diagrams, design calculations, and project specifications.
- Familiarity with applicable AMPP and ISO standards and client specifications.
- AMPP CP2 (Cathodic Protection Technician) certification or higher is preferred.
- ADNOC project experience is an advantage.
IT / Software Skills:
- Proficient in MS Office, Electrical Testing Tools (OMICRON/Doble software), and CMS/Commissioning tracking systems.
- Basic knowledge of AutoCAD for red-line updates is beneficial.
Languages:
- English –&;Full Professional Proficiency.
Qualifications & Experience:
- Bachelor’s degree in electrical engineering'from a recognized university.
- ADNOC-approved or equivalent certification in commissioning or HV/LV safety will be an advantage.
- Recognized training in&;Electrical Safety, Lockout–Tagout (LOTO), and PTW systems&;preferred.
- Essential: Minimum&;10–12 years’ experience in electrical commissioning within&;Oil & Gas, Power Generation, or Petrochemical projects.
- Experience with EPC or PMC contractors under ADNOC, QP, or Aramco projects preferred.
- Proven background in&;field execution, system energization, and documentation control.