HSE Supervisor
Basrah, Iraq
Contract
Engineering
6 days left
Advertisement
JOB DESCRIPTION
Position: HSE SUPERVISOR
Work Location: Basra, Iraq
Industry: Oil & Gas
Industry: Oil & Gas
1. JOB PURPOSE
The HSE Supervisor is responsible for supervising,
monitoring and verifying the implementation of Health, Safety and Environmental
(HSE) requirements across project activities on behalf of the Oil & Gas
Operator through the PMC team.
The position ensures that EPC contractors, subcontractors
and other project parties comply with the Operator's HSE policies, approved HSE
plans, project specifications, applicable legislation and recognized
international standards.
The HSE Supervisor shall conduct regular site
inspections, monitor safe working practices, identify unsafe conditions and
behaviors, verify the implementation of risk control measures, and ensure
timely closure of HSE observations and corrective actions. The role also
supports incident prevention, emergency preparedness, environmental protection
and the promotion of a strong HSE culture throughout project execution.
2. KEY RESPONSIBILITIES
A. HSE Supervision and Compliance Monitoring
- Supervise and monitor the implementation of project HSE requirements across all project activities.
- Ensure EPC contractors and subcontractors comply with the Operator's HSE policies, procedures, standards and contractual requirements.
- Monitor compliance with applicable national HSE legislation and recognized international standards.
- Verify that contractors implement approved project HSE plans, procedures and risk control measures.
- Monitor the effectiveness of contractors' HSE management systems and site safety arrangements.
- Identify HSE deficiencies and ensure appropriate corrective and preventive actions are implemented.
- Report significant HSE concerns and non-compliance issues to the PMC HSE Manager.
B. Site Safety Inspections and Monitoring
- Conduct regular site inspections, safety tours and field observations covering construction, installation, maintenance and other project activities.
- Monitor working conditions and verify compliance with approved method statements and risk assessments.
- Identify unsafe acts, unsafe conditions and potential hazards.
- Ensure appropriate corrective actions are taken to eliminate or control identified hazards.
- Monitor housekeeping, access and egress, scaffolding, lifting operations, excavation activities and temporary facilities.
- Verify the availability and proper use of personal protective equipment (PPE).
- Follow up on outstanding safety observations and ensure timely close-out.
- Maintain records of inspections, observations, findings and corrective actions.
C. Permit to Work (PTW) and High-Risk Activities
- Monitor implementation and compliance with the Operator's Permit to Work system.
- Verify that work permits are properly issued, authorized, communicated and closed.
- Monitor compliance with Job Safety Analysis (JSA), risk assessments and approved method statements.
- Supervise HSE arrangements for high-risk activities, including:
- Hot work and cold work.
- Confined space entry.
- Working at height.
- Lifting and rigging operations.
- Excavation and trenching.
- Electrical isolation and Lockout/Tagout (LOTO).
- Work on or near live operating facilities.
- Pressure testing and other hazardous operations.
- Verify that appropriate safety precautions, competent personnel and emergency arrangements are in place before work commences.
- Intervene and escalate when activities present unacceptable HSE risks, in accordance with delegated authority and Operator procedures.
D. EPC Contractor and Subcontractor HSE Oversight
- Monitor and evaluate EPC contractors' HSE performance and compliance with contractual obligations.
- Review contractors' HSE plans, procedures, risk assessments and method statements.
- Monitor contractors' HSE manpower deployment and site supervision arrangements.
- Verify the competency and qualifications of contractors' HSE personnel and relevant workforce.
- Monitor the implementation of toolbox talks, safety inductions and task-specific safety briefings.
- Participate in contractor HSE meetings and site coordination meetings.
- Identify weaknesses in contractors' HSE performance and recommend improvement measures.
- Monitor the implementation and effectiveness of corrective actions raised against contractors.
E. Risk Assessment and Hazard Management
- Participate in hazard identification exercises and project risk assessments.
- Review Job Safety Analyses, Job Hazard Analyses and task-specific risk assessments.
- Verify that hazards associated with construction and operational activities are properly identified and controlled.
- Monitor the implementation of risk mitigation measures.
- Ensure that changes in work conditions and project activities are assessed for potential HSE implications.
- Support HAZID, HAZOP and other relevant safety review activities where required.
- Promote proactive hazard reporting and effective risk management practices.
F. Incident Reporting and Investigation
- Monitor and ensure timely reporting of accidents, incidents, near misses and unsafe occurrences.
- Participate in incident investigations and assist in identifying root causes and contributing factors.
- Review incident investigation reports and verify the adequacy of proposed corrective and preventive actions.
- Monitor implementation and close-out of incident-related action items.
- Analyze incident trends and identify recurring safety concerns.
- Communicate lessons learned and promote preventive measures across project activities.
- Maintain accurate records of incidents, investigations and HSE performance statistics.
G. Emergency Preparedness and Response
- Monitor the implementation of contractors' emergency response plans.
- Verify the availability and adequacy of emergency equipment, firefighting facilities, first-aid arrangements and emergency communication systems.
- Participate in emergency drills and exercises.
- Monitor contractors' readiness to respond to fire, gas releases, medical emergencies, spills and other emergency situations.
- Verify that emergency access routes and evacuation arrangements are maintained.
- Report deficiencies in emergency preparedness and follow up on corrective actions.
H. Environmental Protection and Management
- Monitor contractors' compliance with environmental requirements and approved environmental management plans.
- Ensure proper management, segregation, storage and disposal of hazardous and non-hazardous waste.
- Monitor arrangements for spill prevention, containment and response.
- Identify and report environmental incidents, pollution risks and non-compliance.
- Monitor air emissions, wastewater management, noise and other relevant environmental aspects.
- Ensure appropriate environmental protection measures are implemented during construction and project execution.
- Verify that environmental observations and corrective actions are properly addressed.
I. HSE Training and Awareness
- Monitor the implementation of HSE induction programs for project personnel and visitors.
- Participate in toolbox talks, safety campaigns and HSE awareness initiatives.
- Verify that workers receive appropriate training for their assigned tasks and associated risks.
- Promote safe working practices and positive safety behavior.
- Identify HSE training gaps and recommend additional training where necessary.
- Encourage workforce participation in hazard reporting and safety improvement initiatives.
J. HSE Reporting and Documentation
- Prepare daily, weekly and monthly HSE inspection and monitoring reports.
- Maintain HSE observation registers and corrective action tracking systems.
- Monitor and report HSE performance indicators, including:
- Total Recordable Incident Rate (TRIR).
- Lost Time Injury Frequency Rate (LTIFR).
- Total hours worked.
- Near misses and hazard observations.
- HSE inspection findings.
- Corrective action closure rates.
- Training and safety induction statistics.
- Review and verify contractors' HSE reports and performance statistics.
- Maintain accurate records of inspections, incidents, training, audits and HSE activities.
- Escalate significant HSE concerns and provide recommendations to the PMC HSE Manager.
K. HSE Audits and Continuous Improvement
- Participate in HSE audits, compliance assessments and contractor performance evaluations.
- Monitor the implementation of audit findings and corrective action plans.
- Identify opportunities to improve site safety practices and HSE management arrangements.
- Promote compliance with the Operator's HSE management system and continuous improvement requirements.
- Participate in HSE meetings and contribute to the development of practical safety improvement initiatives.
3. QUALIFICATIONS
- Bachelor's degree or Diploma in Occupational Health and Safety, Environmental Science, Engineering or a relevant discipline.
- Recognized professional HSE qualification is mandatory or strongly preferred, depending on the Operator's requirements.
- NEBOSH International General Certificate (IGC) or equivalent is highly desirable.
- NEBOSH International Diploma, IOSH or equivalent advanced qualifications are an advantage.
- Valid first aid, firefighting and other relevant safety training certifications are desirable.
4. EXPERIENCE REQUIREMENTS
- Minimum 7 years of professional experience in the Oil & Gas industry, specifically in HSE supervision or HSE management.
- Proven experience in supervising HSE activities for Oil & Gas construction, installation, maintenance or EPC projects.
- Experience in monitoring EPC contractors and subcontractors' HSE performance.
- Demonstrated knowledge and practical experience in Permit to Work systems, risk assessments, JSA, incident investigation and site safety inspections.
- Experience in monitoring high-risk activities, including lifting operations, confined space entry, working at height, hot work and excavation.
- Previous experience working within a PMC organization representing an Oil & Gas Operator is highly desirable.
- Experience in major Oil & Gas facilities, such as Central Processing Facilities (CPF), Gas Processing Plants (GPP), pipelines, production facilities and associated infrastructure is preferred.
5. TECHNICAL KNOWLEDGE AND COMPETENCIES
The successful candidate shall demonstrate:
- Strong knowledge of Oil & Gas HSE management systems and industry best practices.
- Good understanding of applicable HSE legislation and international standards.
- Practical knowledge of Permit to Work systems and high-risk work control.
- Strong understanding of hazard identification, risk assessment and mitigation.
- Knowledge of incident reporting, investigation and root cause analysis.
- Good understanding of construction safety and industrial workplace hazards.
- Knowledge of emergency response and environmental management requirements.
- Ability to identify unsafe conditions and recommend effective corrective actions.
- Ability to assess contractors' HSE compliance and performance.
6. LEADERSHIP AND PERSONAL COMPETENCIES
- Strong supervisory and site management capabilities.
- Excellent communication and interpersonal skills.
- Ability to influence contractors and workforce personnel to comply with HSE requirements.
- Strong observation, reporting and problem-solving skills.
- Proactive approach to hazard identification and incident prevention.
- Ability to work independently and under pressure.
- Strong organizational and follow-up skills.
- High level of professional integrity, discipline and accountability.
- Ability to work effectively within multicultural and multidisciplinary project teams.
- Strong commitment to safety leadership and continuous improvement.
7. PERFORMANCE EXPECTATIONS
The HSE Supervisor shall be evaluated based on:
- Effective monitoring of EPC contractors' compliance with Operator HSE requirements.
- Timely identification and reporting of unsafe conditions and practices.
- Effective implementation and follow-up of corrective and preventive actions.
- Quality and frequency of site inspections and safety observations.
- Effective monitoring of PTW and high-risk activities.
- Timely reporting and investigation support for incidents and near misses.
- Compliance with HSE reporting requirements and accuracy of performance statistics.
- Effective participation in HSE meetings, audits and emergency drills.
- Contribution to improved HSE awareness and overall project safety performance.
8. GENERAL REQUIREMENTS
- Demonstrate full compliance with the Operator's HSE policies, procedures and code of conduct.
- Maintain a visible and proactive safety presence at project sites.
- Promote a positive safety culture and encourage personnel to report hazards and unsafe conditions.
- Maintain professional independence when identifying and reporting HSE non-compliance.
- Protect the Operator's interests by ensuring that project activities are executed in accordance with approved HSE requirements.
- Perform other HSE-related duties as reasonably assigned by the PMC HSE Manager or Project Management.